Action Construction, Inc. company logo

Backflow Prevention and Testing in Stamford, CT

Backflow prevention devices in Stamford, CT get installed and tested by licensed plumbers.

Property owners with a commercial building, an irrigation system, or a connection where contaminated water could flow back into the public supply have an annual duty under Connecticut’s cross connection control program: a certified backflow test. Action Construction installs and repairs the assemblies, performs that test in Stamford, CT, and files the results with the water authority so the property stays compliant.

What a backflow preventer protects against and who needs one

Think of a backflow preventer as a one way gate built into the water line, a valve assembly meant to keep flow moving from the main to your taps and never in reverse. A hydrant being opened, a main break, or heavy firefighting demand can drop the pressure in the street main, and the drop can pull water the wrong direction through any cross connection. If no preventer is installed, the flow that comes back carries what it touched, whether that is fertilizer or lawn chemicals, boiler treatment compounds, or water from a process line, into the water you drink.

In Connecticut the cross connection control program sits with the Department of Public Health, and the local water authority does the enforcing. Under it, an assembly is expected on commercial buildings, lawn irrigation, boiler make up lines, fire suppression systems, and any other cross connection. Stamford has plenty of downtown office towers and multi tenant buildings, so fire suppression and domestic assemblies are a regular requirement here. A property with a boiler, a commercial kitchen, an irrigation system, or a fire sprinkler service likely carries one assembly or more that gets tested annually under the water authority’s rules.

The yearly certified test and the reports filed afterward

Once a year, every assembly has to be tested by a plumber holding the state backflow tester certification, and the results go on file with the water authority. Before testing anything on a first visit, we walk the property looking for cross connections nobody has protected yet, for example a hose bibb lacking a vacuum breaker, an irrigation tie in, or a boiler feed. Finding an unprotected connection later is as much a violation as failing the test. The test uses a calibrated gauge that reads differential pressure. We shut the isolation valves, open each test cock in turn, and watch how every check valve holds pressure and where the relief valve begins to open. Count on 20 to 30 minutes for most assemblies. We file every report for you, so nothing lapses.

When a testing notice sets a deadline, that date starts the clock. If an assembly is left untested, a violation can result, and a lapse that continues allows the water authority to interrupt service until the test is filed. Several devices tested together on one visit cost less per device.

When an assembly fails and when a new one goes in

When a test fails, the culprit is generally the internal checks or the relief valve, and a rebuild kit usually fixes it, although an older brass body may have to be replaced whole. Kits for the common makes are kept in stock here, so a repair and retest can often happen on one trip, and the property is not left noncompliant while a part ships.

A new assembly is

  • placed with access for testing and protection from freezing
  • permitted through the city
  • and sized to the fixture load and the degree of hazard

A failing device behind pressure or water quality complaints is examined as part of the system we also plumb, and is not just exchanged.

Spring startup and fall shutdown for irrigation assemblies

An irrigation assembly stands outdoors, so freezing is its main enemy. In spring we start the system up and test the assembly once it is recharged. In fall we winterize, which means the lines are blown down and the assembly is drained or taken off so it will not crack during a Connecticut winter. Finding a cracked assembly in April means paying for a replacement and a late startup on top of it, which is why the fall visit pays for itself, whether the property is an estate or a commercially landscaped site.

How backflow work is priced

  • For a new installation, the cost comes from the assembly chosen, how severe the hazard is, and the permit.
  • For a rebuild, the quote waits until the tester has seen which parts failed, and replacing the entire assembly is priced by its size and type.
  • Annual testing, charged as a modest flat fee for every assembly, costs less per device when several are handled in the same visit.

On our broader commercial plumbing services, backflow shows up as a single line item, and when a failed assembly on a domestic line produces pressure or water quality problems, the first guess is sometimes a hidden leak.

To see everything we do in town, visit the Stamford plumbing services hub.

The two assembly types we see most and how they fail

On a reduced pressure zone assembly, the relief port is built to discharge water once its internal checks are fouled, so finding a puddle beneath it after a pressure event usually tells you it worked and now wants service, which is different from being broken. That design serves higher hazards, for instance a boiler fed chemical treatment or a commercial process line, while the double check valve assembly serves lower hazard connections such as lawn irrigation and some fire lines, and between them they cover most of what we work on. Outdoor irrigation assemblies mostly fail from freeze damage and grit that gets into the first check.

Indoors, assemblies in mechanical rooms, including the riser rooms of downtown office towers and high rise condos, fail from

  • age
  • worn seats
  • debris lodged in the checks
  • and a relief valve that has seized after sitting idle between tests

On every report we write down the make, model, and serial number, so next year’s test starts with a known history.

Frequently Asked Questions: Backflow Prevention and Testing in Stamford, CT

What does a backflow test involve and what does it cost in Stamford?

Once a year, a certified tester checks with a calibrated gauge that the backflow assembly still stops water from flowing backward, spending about 20 to 30 minutes on each device. The fee is a modest flat amount per assembly, and it drops per device when several are done in the same visit. A device that fails is quoted separately for repair or replacement.

Why is a backflow test so expensive for how short it is?

Short on site does not mean cheap to deliver. The fee covers the tester’s certification, a gauge that has to be sent out for recertification, and filing the report with the water authority. Those costs are fixed, so a visit with several devices tested brings the cost per device down.

Can a plumber do my backflow test?

Yes, provided the plumber holds the state backflow tester certification. We run the certified test and also install and repair assemblies, so one company can fix a failed assembly and retest it, with no second contractor and no stretch out of compliance while parts arrive.

Am I allowed to test my own backflow preventer?

No. In Connecticut, every year a certified tester has to run the test with calibrated equipment and file the results with the water utility. Owners are not allowed to certify their own device.

Will a high rise need several backflow assemblies?

Often it does. A tall building commonly carries one assembly on the domestic water supply, another on the fire suppression line, and sometimes a third on the boiler feed, and each is tested every year with its own report. One scheduled visit from us can cover all of them.

Ready to Start Your Plumbing Project in Stamford?

Need commercial construction, renovations, or plumbing services? Tell us about the project and we will set up a consultation and estimate.

Licensed & Insured | Residential & Commercial | Serving CT & NY