Action Construction, Inc. company logo

Water Leak Detection and Repair in Danbury, CT

Licensed plumbers, written pricing, based in Danbury

A water bill that climbs with no change in use, the sound of water running when everything is off, a warm patch on the floor: hidden water leaks rarely show themselves directly. Action Construction locates and repairs them for Danbury, CT homes and businesses, finding leaks behind walls, under slabs, beneath fixtures, and in buried service lines with the least demolition possible. Our work is the water side of the system. If you smell gas, leave the building and call your gas utility or 911 first.

What leak detection covers

Leak detection deals with the pressurized supply lines and the drain and waste lines that carry water through and out of your home. A suspected gas leak is a different problem and a life safety one, so that call goes to the utility emergency line rather than a scheduled plumbing visit. On the water side, a hidden leak wastes water around the clock and does slow structural damage long before it surfaces as a stain or a puddle, which is why finding it early is worth a service call.

The two questions a leak location visit answers are where the water is escaping and what it will take to reach it. Those drive the size of the repair, whether any finished surface has to come out, and whether the run that failed is a one time fault or a sign the whole branch is near the end of its life.

Signs of a hidden water leak

Hidden leaks tend to show up indirectly. Watch for a water bill that climbs with no change in use, the sound of running water when every fixture is off, warm or damp spots underfoot, staining that spreads on a ceiling or wall, a musty smell in a closet or finished basement, low pressure at the fixtures, or the water meter creeping while the house is completely still. On a well, a pump that kicks on every few minutes with no water running is the same warning sign as a moving meter on city water.

The simplest first check you can run yourself is the meter test. With every fixture and appliance off, note the meter reading, wait 15 to 30 minutes, and read it again. If the dial has moved or the low flow indicator is turning, water is escaping somewhere in the system, and it is time for a professional leak location before the damage spreads.

How we find the leak

1We locate leaks without opening walls first. Acoustic listening equipment, a ground microphone and a pipe contact sensor, picks up the sound water makes forcing through a small opening.
2A correlator compares that sound at two points on the same line to place the leak within a foot or two.
3Line tracing maps where the pipe actually runs. Pressure testing isolates the system into sections to confirm which branch is losing water and how fast.
4Where the leak is on a drain rather than a supply line, a small push camera goes in through a cleanout, and a thermal camera helps on slab and hot water leaks by showing the warm track the water leaves.

Once the source is confirmed we give you a written price for the repair. Because we are a general contractor we can open the wall or the slab, make the repair, and close and finish the surface on the same job rather than leave you to line up a separate contractor for the patch and paint.

What to expect on price

  • A leak location visit is priced as its own line item, and it is money well spent because it turns a demolition guess into a targeted repair.
  • Once we know where the leak is, the repair price depends on access and on what the pipe is made of: a single accessible copper section is a modest repair, while a slab leak or a run of failed galvanized behind finished walls is larger and may point toward repiping that branch.
  • A service line leak in the yard is priced by length, depth, and what sits on top of it, and it is often the moment to replace the whole line rather than dig it up twice.
We give you the location cost and, once the leak is found, the repair cost in writing before any wall or floor is opened.

Frequently Asked Questions: Water Leak Detection and Repair in Danbury, CT

Is there a tool to find a water leak underground in Danbury?

Yes. Licensed leak detection uses acoustic ground microphones, a correlator, line tracing, and pressure testing to pinpoint a buried leak within a small area before any digging, which keeps the repair contained.

What is the best way to detect a hidden water leak?

Start with the water meter. Turn off every fixture and appliance and watch the meter for 15 to 30 minutes. If it moves, water is escaping somewhere in the system, and it is time for a professional leak location before the damage spreads. On a well, watch whether the pump short cycles with nothing running.

Do you handle gas leaks?

No. A suspected gas leak is an emergency. Leave the building, avoid switches and flames, and call your gas utility’s emergency line or 911. We handle water leak detection and repair, and we can work on the plumbing side of an appliance once the utility has cleared the gas.

Can you repair the leak without tearing out the whole wall?

Usually yes. Accurate location means we open only the section over the leak. For slab leaks we can often reroute a short run overhead rather than break up a large area of floor.

My water bill doubled but I see no water anywhere. What now?

That is the classic signature of a buried service line leak or a slab leak, both of which run a long time before surfacing. Book a leak location visit. Finding and fixing it early is far cheaper than the foundation, landscaping, or mold work that a long running hidden leak eventually causes.

Ready to Start Your Plumbing Project in Danbury, CT?

Need commercial construction, renovations, or plumbing services? Tell us about the project and we will set up a consultation and estimate.

Licensed & Insured | Residential & Commercial | Serving CT & NY