Find and fix hidden water leaks in your Stamford, CT home or building.
Hidden water leaks rarely announce themselves directly. More often a water bill creeps up with no change in use, water can be heard running when everything is off, or a patch of floor feels warm. Action Construction locates and repairs leaks for Stamford, CT homes and businesses, whether they sit behind walls, under slabs, beneath fixtures, or in buried service lines, and keeps demolition to the minimum. Gas is a different matter: if you smell it, get out of the building and call your gas utility or 911 first, because our work is the water side.
Water escaping from a pipe you cannot see keeps running all day and night, and it harms the structure slowly, often for a long stretch before a stain or puddle gives it away, so catching it early is worth a visit on its own. This service covers water only: the supply lines that run under pressure and the drain and waste lines that carry water through the building and out of it. A suspected gas leak is a different matter, a danger to life, and it belongs with the utility emergency line, not with a booked plumbing appointment.
A leak location visit has two jobs. It finds out where water is getting out, and it works out how much effort it takes to reach that spot. Those findings decide how big the repair is, whether any finished surface has to be opened, and whether the pipe that failed is an isolated fault or a sign that the whole branch is close to worn out.
Water that hides in walls and floors rarely announces itself. Typical clues include a bill that rises while your habits stay the same, the noise of running water when every tap is off, patches of floor that feel warm or damp, a stain that spreads over a wall or ceiling, a musty odor in a closet or a finished basement, weak flow at the fixtures, and a meter that keeps turning while the building is totally quiet. With a private well the same alarm sounds differently, because the pump starts every few minutes with nothing running, much as a meter would move on city water.
A quick check you can do yourself is the meter test. Switch off every fixture and appliance, jot down the meter reading, and read it again after 15 to 30 minutes. A dial that has moved, or a low flow indicator that is turning, shows water leaving the system somewhere, and then a professional leak location should come before the damage spreads.
Once the source is confirmed, the repair is quoted in writing. Since we are a general contractor, the wall or slab can be opened, the pipe fixed, and the surface closed up, patched, and painted in one job, with no second contractor to hire.
Stamford properties tend to show a handful of recurring problems. Multi story buildings downtown and in the South End can have a hidden leak at a riser connection or inside a shared wall that reaches several units, and building management usually spots it through a jump in the water bill, since no single resident notices. Out in the backcountry, a service line leak between the well and the house, or between the street and a home on city water, can go on for weeks beneath a lawn or driveway, showing only as a soft spot or a stripe of grass that is greener or grows faster. Coastal neighborhoods add one more source, because corrosion tends to run higher near the shoreline and gives supply connections more chances to leak than inland properties get.
Original galvanized supply lines in older homes develop pinhole leaks inside finished walls, because the pipe corrodes from the inside out, and once one pinhole opens on a branch, others tend to follow. That is why the honest conversation is often about repiping the run, not chasing individual holes. A leak that has already flooded part of the property is an emergency plumbing repair. When a corroded water heater is the source and not a pipe, go to water heater repair. Trouble buried on the sewer side is handled under sewer line repair and replacement, and the Stamford plumbing services hub lists everything else we do.
Yes. Using a correlator, ground microphones, pressure testing, and line tracing together, a technician can narrow a buried leak to a small area, so the digging stays to that one spot and the repair stays contained.
The water meter is the place to begin. With all fixtures and appliances turned off, watch it for 15 to 30 minutes. Any movement means water is leaking somewhere in the system, and a professional leak location should follow before damage spreads.
No. If you suspect gas, treat it as an emergency: get everyone out, stay off switches and away from flames, and phone the gas company’s emergency number or 911. We find and fix water leaks, and once the utility has cleared the gas we can handle the plumbing side of an appliance.
Usually not. With the leak precisely located, only the section above it is opened. A slab leak can often be bypassed with a short overhead reroute, so a large area of floor stays intact.
That pattern usually means water is escaping from the buried service line or from under the slab, and either can go on for a long time before it surfaces. Get the leak located soon. Catching it early is far cheaper than the landscaping, mold, or foundation work that a hidden leak causes if it is left running.
Licensed & Insured | Residential & Commercial | Serving CT & NY
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
These cookies are needed for adding comments on this website.
You can find more information in our Cookie Policy and Privacy Policy.